• Service 86 Conway Street Lismore 2480
• Sales 27 Centenary Drive Goonellabah
• Call Us : 02 66215981
• Service 86 Conway Street Lismore 2480
• Sales 27 Centenary Drive Goonellabah
• Call Us : 02 66215981
The KANGA Mini Range Rotary Cutters have been designed for general purpose cutting on smallholding farms and surrounding areas.
The deck is fully reinforced and the safety chains have been incorporated for maximum durability and safety.
The KANGA Mini Range comes with a sliding tower which enables the operator to offset the deck (left or right) and get closer to fence lines, or other hard to reach areas.
The high speed gearbox produces fast blade speeds and the lowered high tensile cutter bar results in fast, clean, dependable mowing in long grass and light scrub.
| Code | KSMN100 |
|---|---|
| Description | MINI 1000 Rotary Cutter |
| Construction | 2.5mm, square, ‘clean top’ deck with reinforced subframe |
| Gearbox | 50hp, 540rpm, 1:2.83 ratio |
| PTO shaft/clutch | Series 4 with 150mm (6″) friction (slip) clutch |
| Skids | Adjustable, positive locking, four (4) positions (30mm increments) |
| Cutter bar | Lowered, bolt together, high tensile steel |
| Blades | Stepped, heat treated, spring steel pivoting on hardened bushes |
| Linkage/mounting | Double clevis, category 1 |
| Tower position(s) | Multiple – offset (left and right) and centre mounted |
| Finish | Powder coated |
| Stone guards | Front and rear chains (6mm) incorporated into the deck |
| Overall width (mm) | 1175 |
| Cutting width (mm) | 1000 |
| Cutting height (mm) | 40 – 130 |
| Tractor range (hp) | 25 – 40 |
| Blade tip speed (ft/min) | 16,803 |
| Weight (kg) | 180 |
| Code | KSMN120 |
|---|---|
| Description | MINI 1200 Rotary Cutter |
| Construction | 2.5mm, square, ‘clean top’ deck with reinforced subframe |
| Gearbox | 50hp, 540rpm, 1:2.83 ratio |
| PTO shaft/clutch | Series 4 with 150mm (6″) friction (slip) clutch |
| Skids | Adjustable, positive locking, four (4) positions (30mm increments) |
| Cutter bar | Lowered, bolt together, high tensile steel |
| Blades | Stepped, heat treated, spring steel pivoting on hardened bushes |
| Linkage/mounting | Double clevis, category 1 |
| Tower position(s) | Multiple – offset (left and right) and centre mounted |
| Finish | Powder coated |
| Stone guards | Front and rear chains (6mm) incorporated into the deck |
| Overall width (mm) | 1375 |
| Cutting width (mm) | 1200 |
| Cutting height (mm) | 40 – 130 |
| Tractor range (hp) | 30 – 40 |
| Blade tip speed (ft/min) | 19,203 |
| Weight (kg) | 205 |
| 100.411a | KANGA Mini stepped blade (pair) |
| 100.411b | KANGA Mini stepped suction blade (pair) |
| 100.412 | KANGA Mini 1/2” blade bolt kit |
| 100.413 | KANGA Mini 16mm blade bolt kit (suit cutters pre-2008) |
Ongmac Sales And Parts Division
& Service Centre Hours
Monday To Friday 8am – 5pm
Saturday 8.30am – 12pm
Sunday CLOSED
Ongmac Sales And Parts Division – OPEN
27 Centenary Dr Goonellabah
Call Us : 02 6621 5981
+
Ongmac Trading Pty Ltd – SERVICE CENTRE OPEN
86 Conway Street, Lismore NSW 2480
Call Us : 02 6621 5981
+
Ongmac Parts – closed for flood recovery84 Conway Street, Lismore NSW 2480
Call Us : 02 6621 5981
+
Ongmac Industrial & Agricultural Sales
Grafton to Northern Rivers
Philip Gilbert
Call Mobile : 0448 800 964
Copyright 2022 © All rights Reserved.
